<img height="1" width="1" style="display:none;" alt="" src="https://px.ads.linkedin.com/collect/?pid=7483292&amp;fmt=gif">
Western States Metal Roofing
Change Close

HOMEOWNERS: 750 sq. ft. minimum to receive a quote or sample.

Get a Quote
Contact
Products
Colors & Finishes
Spec Builder
Document Finder
Learning Center
Color Visualizer
3D Textures/E-Samples®
Color Catalog
Get a Quote
Contact
Products
Back to Main
Metal Roofing - Exposed Fastener
Back to Products
All Exposed Fastener
7/8" Corrugated
Ag Panel
PBR Panel/R Panel
7.2 Panel/Western Rib®
Perforated Panels
Accessories
Roofing Underlayment
Trim and Flashings
All Metal Roofing Panels
Metal Roofing - Standing Seam
Back to Products
All Standing Seam
Snap Lock - 1.75" Deep
Mechanically Seamed
Nail Strip
Curved Standing Seam
Pre-Notching
Accessories
Roofing Underlayment
Trim and Flashings
Metal Siding - Exposed Fastener
Back to Products
All Exposed Fastener
7/8" Corrugated
Ag Panel
PBR Panel/R Panel
7.2 Panel/Western Rib®
Perforated Panels
Accessories
Trim and Flashings
All Metal Siding Panels
Metal Siding - Concealed Fastener
Back to Products
All Concealed Fastener Panels
Metal Board & Batten
Narrow Groove® - 1" Deep
T-8 PlankWall® - Metal That Looks Like Wood
T-Groove® - 1" Deep
T-Reveal® - 1.5" Deep
Western Reveal® - 1.5" Deep
WAV® Panels - 7/8" Wave Panel
Accessories
Trim and Flashings
All Metal Siding Panels
Coil, Flat Sheets, Additional Items
Back to Products
Coil
Flat Sheets
Perforated
Custom Metal Panels
Curved Metal Roofing
On-Site Roll Forming
Metal Deck
Accessories
Back to Products
Trim and Flashings
Roofing Underlayment
Fasteners
Standing Seam Roof Attachments
Butyl/Sealant Tape
Skylight Panels
Foam Closures
Galvanized Square Tubes
Metal Purlins
Metal Roof Sealant
Pipe Boots
ProfileVent®
Aluminum
Back to Products
Roofing Panels
Wall Panels
Flat Sheets
Coil
Copper
Back to Products
Roofing
Wall Panels
Flat Sheets
Coil
Corten and Bare Steel
Back to Products
Metal Roofing & Wall Panels
Flat Sheets
Coil
Corten Components
Metal That Looks Like Wood
Back to Products
Metal Board & Batten
T-8 PlankWall® Panels
Wood Lock® Panels
MS2® Panels
Colors & Finishes
Back to Main
Standard Colors
Back to Colors & Finishes
PVDF - Standard Colors
PVDF - Matte Finishes
PVDF - Special Order
SMP - Standard Colors
All Colors & Finishes
Specialty Paint Prints
Back to Colors & Finishes
Blackened Steel Series
Bonder-Paint®
Copper Colors
Rusted Colors
Streaked Series
Wood Colors
Zinc Colors
All Colors & Finishes
Mattes, Blacks, Grays
Back to Colors & Finishes
Matte Colors
Black Colors
Gray Colors
All Colors & Finishes
Metal That Looks Like Wood
Back to Colors & Finishes
Metal Board & Batten
T-8® Plankwall
Wood Lock® Standing Seam
MS2® Mechanically Seamed
All Colors & Finishes
Additional Finishes
Back to Colors & Finishes
Aluminum
Black Phosphate®
Bonderized
Copper
Corten /Bare Steel
Galvanized
Galvalume®/Zincalume®
Perforated Metal
Stainless Steel
E-Samples & 3D Textures - ALL
Back to Colors & Finishes
T-8 PlankWall® - Wood Colors
Corrugated Metal - Streaked Series®
Color Charts
Back to Colors & Finishes
2025 Color Catalog
Color Charts
Spec Builder
Document Finder
Learning Center
Color Visualizer
3D Textures/E-Samples®
Color Catalog

Standing Seam Metal Roofing Panels

Do you want instant curb appeal? Standing seam metal roofing has a distinctive look that will complement many home styles. Over 100 colors to choose from. Buy standing seam roofing directly from the manufacturer and save.

Free Metal Samples 3D Textures/E-Samples®

Types of standing seam metal roofing
10 Benefits of a Standing Seam Roof

Need Roofing Underlayment?

Click here

STANDING SEAM CONCEALED FASTENER PANELS

Types of Standing Seam Metal Roofing Panels

There are 3 types of standing seam metal roofing panels and all of them are a concealed fastener system. This means that the fasteners on each metal panel are not visible or exposed to the weather. Concealed fastener panels are more weather-tight and expensive when compared to exposed fastener panels.

  • Mechanically Seamed - The panel edges are connected together with a roof seamer.
  • Snap Lock Panels With Concealed Fasteners And Clips - The clips attach to the panel and fasten directly onto the roof deck.
  • Nail Strip or Nail Flange - A standing seam panel that does not use clips.
https://6069238.fs1.hubspotusercontent-na1.net/hubfs/6069238/images/galleries/gun-metal-gray/standing-seam-gun-metal-gray-1.jpg

Western Lock® Standing Seam

This type of standing seam panel is the best all-around solution when you consider the performance of the panel, cost, and ease of installation.

  • Snap Lock With Concealed Fasteners And Clips
  • 1.75" Seam Height 
  • Our Most Popular Standing Seam

See Panel Details

https://6069238.fs1.hubspotusercontent-na1.net/hubfs/6069238/images/galleries/gun-metal-gray/gun-metal-MS2.jpg

Mechanically Seamed

This is the most weather-tight style of standing seam metal roofing. It's ideal for very low sloped roofs with a pitch as low as .5" to 1":12". It's a difficult panel to install and is rarely installed by DIY roofers.

  • Mechanically Fastened Seams
  • Double Lock Or Single Lock
  • 1", 1.5", 2" Seam Height
  • The Most Expensive Standing Seam

See Panel Details

https://6069238.fs1.hubspotusercontent-na1.net/hubfs/6069238/images/galleries/gun-metal-gray/gun-metal-Nail%20Strip.jpg

Western Seam® Nail Strip

Nail strip roofing panels are a snap lock system that uses screws and does not have clips. The male flange has one inch slots that are spaced 6 inches apart and fastened directly to the roof deck.

You sacrifice a lot of performance when you eliminate the clips. It's slightly less expensive and a little easier to install, but it's inferior to MS2® or Western Lock®

  • Nail Strip or Nail Flange System
  • 1" or 1.5" Seam Height

 

See Panel Details

https://6069238.fs1.hubspotusercontent-na1.net/hubfs/6069238/curve-tool/2-curved-ms1-5.png

Curved Standing Seam

From classic domes that have inspired architecture for centuries to contemporary curved forms, these sculptural elements make a lasting statement

  • Mechanically Fastened Panels Only
  • 1" and 1.5" Seam Height
  • Double Lock Or Single Lock

See Panel Details

Standing Seam FAQ

Standing Seam Frequently Asked Questions

At Western States Metal Roofing, we're often asked a number of questions related to standing seam metal. 

What is Pre-Notching Standing Seam?

pre-notched-standing-seam-thumb

To save you time, money, and labor, we now have pre-notched standing seam panels available for purchase:

The cost of pre-notching will be less than the labor cost of manually notching the panels on the job-site. 

  • 24 Gauge & 26 Gauge = $2.50 Per Panel
  • 22 Gauge = $4.50 Per Panel

LEARN MORE ABOUT PRE-NOTCHING

Watch Video Now

pre-notched-standing-seam-thumb

How much does standing seam metal roofing cost?

standing-seam-cost

A standing seam metal roofing system will cost about twice as much as corrugated metal roofing.

  • If you purchase from a standing seam metal roofing manufacturer, the panels will cost $2 to $4 per sq. ft.
  • The total price including materials and installation will cost $8 to $14 per sq. ft

Watch Video Now

standing-seam-cost

What are striations, stiffening ribs, and pencil ribs?

striations-thumb

Adding structure to your panel is a great way to minimize oil canning. In this video we discuss clip relief, striations, stiffening ribs, and pencil ribs.

Watch Video Now

striations-thumb

What gauge is standing seam metal roofing?

best-metal-roofing-gauge

The vast majority of standing seam metal roofing jobs are 24 gauge steel. It’s a premium roofing system that’s expected to last 40 plus years. The components must be designed to work as a whole. Standing seam roofing panels are the most expensive panels and use the best paint system. It wouldn’t make sense to use a light gauge steel for minimal savings and lesser performance.

Watch Video Now

best-metal-roofing-gauge

What is the difference between standing seam vs corrugated metal roofs?

standing-seam-vs-exposed-fastener-video

The biggest difference between these two classic metal roofing systems is the method of attachment. Standing seam panels are a concealed fastener system which means the fasteners don’t penetrate the face of the panel during installation and they’re not visible. Corrugated panels are an exposed fastener panel, meaning that you need to drill a screw hole through the panel to fasten it to the structure.

Watch Video Now

standing-seam-vs-exposed-fastener-video

What is oil canning on a metal roof?

stiffening-ribs-striations-thumbnail

Have you ever seen a metal roofing material that looked like it was wrinkled? This is known as oil canning and it's common on standing seam metal roofs.

Oil canning on a standing seam metal panel is an aesthetic issue only. Striations, stiffening ribs, and clip relief can disguise the appearance of oil canning on your metal roofing panels.

Watch Video Now

stiffening-ribs-striations-thumbnail

What Is A Standing Seam Metal Roof?

Standing seam metal roofing has a flat area in the middle and raised vertical seams at both ends. It's a concealed fastener system, meaning that the fasteners are not visible or exposed to the weather. It's water-tight and long lasting, but it's also an expensive panel system.

What Is Snap Lock Standing Seam Metal Roofing?

Snap Lock is a concealed fastener standing seam metal roofing that has a male and female leg that snaps together. It's available as a clip fastened or nail flange fastened panel.

How Do You Install A Standing Seam Roof System?

Standing Seam Metal Roof Installation Clip Attachment-4

A metal roof installation for standing seam panels is a detailed process. To help make it easier, we have created a video series that goes over how to do each step of a standing seam roof installation to guide you through the process.  

GO TO STANDING SEAM INSTALLATION VIDEO PAGE

Standing Seam Metal Roof Installation Clip Attachment-4

LET YOUR IMAGINATION RUN WILD!

COLOR & PRODUCT VISUALIZER

Choose Different Textures, Colors, Finishes, and Panel Types On Your Home Before You Decide

Visualize Your Building