HOMEOWNERS: 750 SQ. FT. MINIMUM, NO MINIMUMS FOR CONTRACTORS

Colors & Finishes
kynar-metal-roof

Choose metal roofing and metal siding panels from a variety of standard or special order colors in a Kynar® 500 paint finish. 

pbr-panels-country-red-barn

Choose metal roofing and metal siding panels from a variety of standard colors in an SMP paint finish. 

rustwall-a606-10

Choose metal roofing and metal siding panels from a variety of non-painted finishes.

black-ore-matte-standing-seam-huntington-beach

Choose metal roofing and metal siding panels that look dark aged metal.

corrugated-matte-black

Choose metal roofing and metal siding panels in Blacks, Bronzes, and Grays.

03-green-copper-standing-seam-02

Choose metal roofing and metal siding panels that look like aged patina'd copper.

galvalume-pbr-panel

Choose metal roofing and metal siding panels from a variety of panel types in a Galvalume® or Galvanized finish. 

ash-gray-corrugated-metal-building

Choose metal roofing and metal siding panels in various shades of gray.

galv-ten-robust-standing-seam

Choose metal roofing and metal siding panels that look like weathered gray zinc.

charcoal gray standing seam

Choose metal roofing and metal siding panels from a variety of matte colors in a Kynar® 500 paint finish. 

plankwall-1200x628

Choose metal roofing and metal siding panels that look like real wood. 

streaked-copper-corrugated-el-ranchito-04

There Are No Other Paint Prints That Even Come Close To The Authenticity Of The Streaked Series. It Is Designed Specifically For 7/8" Corrugated And Is A Pre-Painted Finish That Is Available In 4 Different Color Replications: Orange/Brown Rusted Roofing, Aqua Green/Brown Copper, Blue/Green Copper, Weathered Galvanized With Orange Rust Streaks

01-Fresh-Rust-Standing-Seam_b

Choose metal roofing and metal siding panels that are painted to look like real rust without the rust stains.

09-Varicool-Kaleidoscope_b

VARI-Cool Color Changing Paint System. This Exotic Paint System Is Unlike Anything You Have Ever Seen. Request A Color Chip.

Accessories
Metal Roofing Accessories

Find fasteners, anchors, bolts, hardware and more at metalforroofing.com. We are a leading provider of quality fastening products for metal roofing and siding

trim-and-flashing

Flashing and trim available in steel with coordinating finishes and colors for your residential, commercial, industrial or agricultural metal roofing project.

butyl-sealant-tape

Use sealant tape at the panel laps for metal roofs to increase weather tightness. Order yours today.

metal-roofing-fasteners-screws

Self drilling metal roofing fasteners, rivets, and clips available. All types. Metal to Wood and Metal to Metal. Painted and Galvanized.

fiberglass-roofing-panels

High Quality, Natural Illuminating FRP Panels that match our most popular metal roofing profiles. Immediate Availability - 8 OZ White.

78-corrugated-outside-foam-closure

Foam closures for metal roofing and metal decking. 7/8" Corrugated, PBR Panel, Western Rib (7.2 Panel). Shop a wide variety of foam closures and foam plugs.

galvanized-g90-square-tube

Galvanized square tube in stock in 14 gauge at many different lengths. Galvanized tube used for metal fence posts, metal carports, deck posts, panic bar gates, or building supports.

metal-purlins

Metal Purlins and Cee Channel are in stock. Cee Purlins and Zee Purlins. Galvanized and Red Prime Painted. Immediate availability.

novaflex-metal-roof-adhesive-sealant

Buy Metal Roof Sealant. Available In A Variety Of Colors And Sizes. NovaFlex Construction Silicone Colored Caulk for Metal Roofing Applications.

Western States Metal Roofing - Pipe Flashing on a Metal Roof install Blog

We offer a wide range of pipe flashings in both square and round. Shop now.

profile-vent-ridge-ventilation-closure_b

Proper metal roof ventilation is essential for a healthy indoor environment. Our ProfileVent ventilation products are an intelligent solution for your roof.

How To Install Synthetic Underlayment On A Metal Roof-15

Find high strength moisture protective covering for the underlayment of your metal roof.

snow-retention-solutions

All of S-5!’s snow guard retention systems dramatically reduce these risks associated with rooftop avalanches while maintaining the clean lines of the roof. With multiple options to choose from, you can browse our selection of metal roof snow stops to see which product will work the best for your metal roof.

Solar-Fade-1-1

S-5! provides the easiest, most cost-effective way to install solar panels directly to standing seam metal roofs.

C Channel - Red Oxide

C Channel, also known as receiver channel is a metal building component that is 1/8" taller than a steel purlin. The purlins will fit into the red cee channel.

Get a Quote

Delivery Throughout The USA and Canada

Red Prime Painted Cee Channel

Red Oxide Receiver Channel

red-iron-oxide-cee-channel

What is metal receiver channel?

Channels are secondary steel framing members that serve as a receiver channel at the end of steel purlins. They can also be used for a number of other applications either alone or welded back-to-back. Receiving channel is also used to receive purlins or girts at the ends of the building structure.

They are 1/8 inch taller than the Cee or Zed profile, so the end of the profile will slip in perpendicular to the channel. The top and bottom of the profile are bolted to the flanges of the receiving channel. Receiving channel is typically used in carports and low strain applications.

What size and lengths does steel receiver channel come in?

Receiver channel is available in a wide variety of sizes and lengths. See graph below for sizes of Cee channels. Custom sizes and lengths available with a two week lead time. Metal channels are in stock for immediate will call or delivery. Delivery trucks servicing the entire United States.

Availability Chart

Red oxide receiver channel is available in 20' and 25' lengths in a 14 gauge metal thickness. See the graph below for C channel sizes that are in stock for immediate pick up or delivery.

Custom sizes and lengths available with a two week lead time. 

 

metal-cee-channel-graph

 

Get A Quote

Related Products

Additional Items You May Be Interested In

Receiver Channel Properties

What Size Channel Do I Need For My Roof?

All Steel Studs Manufacturers Association products have a four part identification code which identifies the size (both depth and flange width), styles and material thickness of each number.

EXAMPLE:

MEMBER DEPTH

FLANGE WIDTH

(Example: 6"= 600 x 1/100 inches)

(Example: 1-5/8"= 1.625"= 162 x 1/100 inches)

All member depths are taken in 1/100 inches.

For all "T" sections member depth is the
inside to inside dimension.

All flange widths are taken in 1/100 inches.

 

product-identification

Style: 

Material Thickness:

(Example: Stud or Joist Section = S)

(Example: 0.054 in. = 54 mils; 1 mil = 1/1000 in.)

The four alpha characters utilized by
the designator system are:

S = Stud
T=Track Sections/Channels
U=Channel Sections
F=Furring Channels Sections

Material thickness is the minimum base metal thickness in mils.

Minimum base metal thickness represents 95% of the design thickness.

C-T-U-F-sections-joist-channel

SECTION

FLANGE WIDTH

MINIMUM THICKNESS

REFERENCE

S125

1-1/4"

18

25

S137

1-3/8"

27

22

S162

1-5/8"

30

20 (Drywall)

S200

2"

33

20 (Structural)

S250

2-1/2"

43

18

   

54

16

   

68

14

   

97

12

 

metal-roofing-learning-center-02
Do You Have Questions about metal roofing? We have the answers.

The Metal Roofing Learning Center

It's a great resource for contractors, architects, and homeowners.

Easy to navigate learning center with videos and blogs that will answer your questions.

  • Installation Videos
  • Panel Comparisons
  • Cost
  • Much More

view now

metal-roofing-learning-center-02