Eave Trim With Bullnose Drip Edge - Part #WS-402

Eave trim with a bullnose drip edge is an easier and faster installation than eave trim with a joggle cleat. There are less parts to install. Bullnose drip edge should not be installed on roof pitches that are greater than 6" in 12"

https://f.hubspotusercontent30.net/hubfs/6069238/images/trim-flashings/standing-seam/part-ws-402-a-eave-flashing-with-bullnose-detail.jpg

WS-402 Eave Trim With Bullnose Drip Edge Detail

CLICK TO ENLARGE

https://f.hubspotusercontent30.net/hubfs/6069238/images/trim-flashings/standing-seam/part-ws-402-bull-nose-drip-eave-trim-1.jpg

WS-402 Eave Trim With Bullnose Dimensions

CLICK TO ENLARGE

https://f.hubspotusercontent30.net/hubfs/6069238/images/trim-flashings/standing-seam/part-ws-401-trim-cleat-1.jpg

WS-401 Trim Cleat Dimensions

For every 10' of eave trim, you will need 10' of trim cleat.

Click To Enlarge

WS-402 - EAVE WITH BULLNOSE - PARTS LIST

This parts list is designed to help you calculate the quantity of accessories that you’ll need for your trim installation. It has all of the accessories that are needed to install 1 full piece of trim, which is 120" long. To calculate the total number of accessories you will need for your job, simply take the number of trim pieces associated with the trim part purchased and multiply the list by that number for a total for your project.

Components List

1 Piece Bullnose Eave Trim - WS-402
Roof Pitch Required
1 Piece Trim Cleat - WS-401
20 Pancake Head Screws (#10X1") NO Washer
Verify Metal To Wood
1/4 Tube Of Butyl Sealant
1/4 Tube Silicone Sealant
10 Linear Feet Of 8" Wide Sharkskin Ultra SA - Self Adhesive Roofing Underlayment

WSMR Recommends the use of a water barrier or underlayment prior to the installation of the trim components or metal roofing panels.

We recommend:

DOWNLOAD INSTALLATION GUIDE

STANDING SEAM METAL ROOFING INSTALLATION VIDEOS

EAVE TRIM INSTALLATION VIDEOS

How To Install A Bullnose Eave Trim

Step by step video with installation instructions that includes: cutting and finishing the eave trim at the gable ends ends, trim cleat installation, overlaps, and fastening.

This video specifically covers bullnose eave trim installation for snap lock and clip fastened standing seam metal roofing panel.

Watch Now

How To Install Eave Trim With Joggle Cleat

Step by step video with installation instructions that includes: cutting and finishing the eave trim at the gable ends ends, joggle cleat and trim cleat installation, overlaps, and fastening.

This video specifically covers eave trim with joggle cleat installation for snap lock and clip fastened standing seam metal roofing panel.

Watch Now

Just in case you forgot

ADDITIONAL ITEMS YOU MAY NEED...

Sharkskin Synthetic Roofing Underlayment

Ultra SA - Self Adhesive (Best)
50 Year Warranty
12 Months UV Resistance
Ultra - Non Adhesive (Better)
50 Year Warranty
12 Months UV Resistance
Comp (Good)
25 Year Warranty
6 Months UV Resistance

Learn More

Clips And Fasteners

Clips and fasteners for standing seam metal roofing panels.

Clips
Rivets
Fasteners
Metal To Wood
Metal To Metal
Lap Screws

Learn More

Snow Retention Systems

When snow accumulations begin to melt, the result can be catastrophic as the blanket of snow avalanches off the roof dumping tons of snow onto anything in its path.

It can damage landscape, gutters, adjacent roofs, vehicles and cause injury or death to passers-by. All of S-5!’s snow retention systems dramatically reduce these risks associated with rooftop avalanches while maintaining the clean lines of the roof.

Learn More