HOMEOWNERS: 750 sq. ft. minimum to receive a quote or sample.
Find fasteners, anchors, bolts, hardware and more. We are a leading provider of quality fastening products for metal roofing and siding
Flashing and trim available in steel with coordinating finishes and colors for your residential, commercial, industrial or agricultural metal roofing project.
Use sealant tape at the panel laps for metal roofs to increase weather tightness. Order yours today.
Self drilling metal roofing fasteners, rivets, and clips available. All types. Metal to Wood and Metal to Metal. Painted and Galvanized.
High Quality, Natural Illuminating FRP Panels that match our most popular metal roofing profiles. Immediate Availability - 8 OZ White.
Foam closures for metal roofing and metal decking. 7/8" Corrugated, PBR Panel, Western Rib (7.2 Panel). Shop a wide variety of foam closures and foam plugs.
Galvanized square tube in stock in 14 gauge at many different lengths. Galvanized tube used for metal fence posts, metal carports, deck posts, panic bar gates, or building supports.
Metal Purlins and Cee Channel are in stock. Cee Purlins and Zee Purlins. Galvanized and Red Prime Painted. Immediate availability.
Buy Metal Roof Sealant. Available In A Variety Of Colors And Sizes. NovaFlex Construction Silicone Colored Caulk for Metal Roofing Applications.
We offer a wide range of pipe flashings in both square and round. Shop now.
Proper metal roof ventilation is essential for a healthy indoor environment. Our ProfileVent ventilation products are an intelligent solution for your roof.
Find high strength moisture protective covering for the underlayment of your metal roof.
All of S-5!’s snow guard retention systems dramatically reduce these risks associated with rooftop avalanches while maintaining the clean lines of the roof. With multiple options to choose from, you can browse our selection of metal roof snow stops to see which product will work the best for your metal roof.
S-5! provides the easiest, most cost-effective way to install solar panels directly to standing seam metal roofs.
Introducing the new SolarFoot™ for exposed fastener metal roofing with the strength, testing, quality, and time-proven integrity you expect from S-5!.
The SolarFoot provides an ideal mounting platform to attach the L-Foot of a rail-mounted PV system to the roof. This solution is The Right Way to secure rail-mounted solar systems to exposed fastener metal such as AG-Panel or R-Panel.
Clamp To Seam Tool Snow Retention Calculator Clamps & Brackets List Case Studies
The SolarFoot is a simple, cost-effective pedestal for L-Foot (not included) attachment of rail-mounted solar PV. The unique design is compatible with all rail producer L-Foot components. The new SolarFoot assembly ensures a durable weathertight solution for the life of the roof. Special factory applied butyl co-polymeric sealant contained in a reservoir is The Right Way, allowing a water-tested seal. Stainless integrated stud and hex flange lock-nut secure the L-Foot into position. A low center of gravity reduces the moment arm commonly associated with L-Foot attachments. Direct attachment of the SolarFoot to the structural member or deck provides unparalleled holding strength.
*Fasteners sold separately. Fastener type varies with substrate. Contact us on how to purchase fasteners and obtain our test results. L-Foot also sold separately.
Metal Roof Innovations, Ltd (MRIL) warrants that all S-5! products manufactured by it and bearing its name to be free from defects in material and workmanship on the date of sale by an authorized MRIL distributor to the original purchaser. As purchaser’s sole remedy for breach of this warranty, MRIL will, for a period of twenty-five (25) years after the date of sale, repair or replace any part of the S-5! manufactured product which is defective. This warranty applies only when the S-5! product is properly installed, used and maintained. Read the full warranty.
S-5!® Warning! Please use these products responsibly! Visit our website or contact your S-5! distributor for available load test results. The user and/or installer of these parts is responsible for all necessary engineering and design to ensure the SolarFoot™ has been properly spaced and configured.
Notice to S-5! users: Due to the many variables involved with specific panel products, climates, wind loads, snow loads, and job particulars, the manufacturer cannot and does not express any opinions as to the suitability of any S-5! assembly for any specific application and assumes no liability with respect thereto. S-5! products are tested for ultimate holding strength on various profile types and materials. These install instructions serve to illustrate the correct procedure for securing the Solar Foot to a roof. Proper layout and frequency will vary on a job specific basis and should be determined by a qualified professional. This is an installation guide only and the photographs and drawings herein are for the purpose of illustrating installation, tools, and techniques, not system designs.
The SolarFoot is made for exposed-fastener metal roofing. It provides an ideal, weatherproof mounting platform to attach the L-foot of a rail mounted solar system or other ancillaries to the roof.
Tools Needed:
Placement Tip
The SolarFoot should be placed in the flat of the panel, between the ribs. It is designed to straddle striations or minor stiffening ribs when necessary. The SolarFoot must be mounted directly over and into the supporting structure of the roof, i.e. wood decking, wood or steel purlins, or trusses, NEVER into the metal roofing material alone.
Fastener Selection
Fastener selection will depend on whether the supporting structure of the roof is metal or wood.When relying upon tested load values one of the below fasteners MUST be used.
To Install:
NOTE: Attachment frequency and spacing for PV arrays is the responsibility of the system designer. The makers of S-5! SolarFoot make no representations with respect to the variables involved in PV array design. Visit the S-5! website for load testing data.
***S-5!® Warning! Please use this product responsibly!***
These instructions are for use by those experienced in the trade. Always follow appropriate safety precautions and use appropriate tools.
SolarFoot™ is compatible with almost any trapezoidal, exposed-fastened profile.
Is your metal roofing being installed over wood? If so, you will need roofing underlayment.
Synthetic underlayment provides an extra barrier of protection from water penetration and will protect your home from the elements.
C Purlins, Z Purlins, and Channel
It's a great resource for contractors, architects, and homeowners.
Easy to navigate learning center with videos and blogs that will answer your questions.
Choose Different Textures, Colors, Finishes, and Panel Types On Your Home Before You Decide.