Metal Coil/Flats: Same Day Pick Up In Arizona

See Details
Western States Metal Roofing
Change Close

HOMEOWNERS: 750 sq. ft. minimum to receive a quote or sample.

Get a Quote
Contact
Products
Colors & Finishes
Spec Builder
Document Finder
Learning Center
Color Visualizer
3D Textures/E-Samples®
Color Catalog
Get a Quote
Contact
Products
Back to Main
Metal Roofing - Exposed Fastener
Back to Products
All Exposed Fastener
7/8" Corrugated
PBR Panel/R Panel
7.2 Panel/Western Rib®
Perforated Panels
Accessories
Trim and Flashings
All Metal Roofing Panels
Metal Roofing - Standing Seam
Back to Products
All Standing Seam
Snap Lock - 1.75" Deep
Mechanically Seamed
Nail Strip
Pre-Notching
Accessories
Trim and Flashings
Metal Siding - Exposed Fastener
Back to Products
All Exposed Fastener
7/8" Corrugated
PBR Panel/R Panel
7.2 Panel/Western Rib®
Perforated Panels
Accessories
Trim and Flashings
All Metal Siding Panels
Metal Siding - Concealed Fastener
Back to Products
All Concealed Fastener Panels
Metal Board & Batten
Narrow Groove® - 1" Deep
T-8 PlankWall® - Metal That Looks Like Wood
T-Groove® - 1" Deep
T-Reveal® - 1.5" Deep
Western Reveal® - 1.5" Deep
WAV® Panels - 7/8" Wave Panel
Accessories
Trim and Flashings
All Metal Siding Panels
Coil and Flat Sheets
Back to Products
Coil
Flat Sheets
Aluminum
Back to Products
Roofing Panels
Wall Panels
Flat Sheets
Coil
Copper
Back to Products
Roofing
Wall Panels
Flat Sheets
Coil
Corten and Bare Steel
Back to Products
Metal Roofing & Wall Panels
Flat Sheets
Coil
Corten Components
Metal Purlins and Channel
Back to Products
Metal Purlins
Channel
Metal That Looks Like Wood
Back to Products
Metal Board & Batten
T-8 PlankWall® Panels
Perforated
Back to Products
7/8" Corrugated
R Panel
7.2 Panel
Flat Sheets
Coil
Metal Deck
Back to Products
Roof Deck
Floor Deck
Form Deck
Colors & Finishes
Back to Main
Standard Colors
Back to Colors & Finishes
PVDF - Standard Colors
PVDF - Matte Finishes
PVDF - Special Order
SMP - Standard Colors
All Colors & Finishes
Specialty Paint Prints
Back to Colors & Finishes
Blackened Steel Series
Bonder-Paint®
Copper Colors
Rusted Colors
Streaked Series
VARI-Cool® - Color Changing
Wood Colors
Zinc Colors
All Colors & Finishes
Mattes, Blacks, Grays
Back to Colors & Finishes
Matte Colors
Natural Matte®
Black Colors
Gray Colors
All Colors & Finishes
Metal That Looks Like Wood
Back to Colors & Finishes
Metal Board & Batten
T-8® Plankwall
All Colors & Finishes
Additional Finishes
Back to Colors & Finishes
Aluminum
Black Phosphate®
Bonderized
Copper
Corten /Bare Steel
Galvanized
Galvalume®/Zincalume®
Perforated Metal
Stainless Steel
E-Samples & 3D Textures - ALL
Back to Colors & Finishes
T-8 PlankWall® - Wood Colors
Corrugated Metal - Streaked Series®
Color Charts
Back to Colors & Finishes
2024 Color Catalog
Color Charts
Spec Builder
Document Finder
Learning Center
Color Visualizer
3D Textures/E-Samples®
Color Catalog
MS2® MECHANICALLY SEAMED ROOFING

Eave Trim With Bullnose Drip Edge - Part #WS-130

Eave trim with a bullnose drip edge is an easier and faster installation than eave trim with a joggle cleat. There are less parts to install. Bullnose drip edge should not be installed on roof pitches that are greater than 6" in 12"

https://f.hubspotusercontent30.net/hubfs/6069238/images/trim-flashings/ms2/ms2-wsd-w23.jpg

WS-130 Eave Trim With Bullnose Drip Edge Detail

CLICK TO ENLARGE

https://f.hubspotusercontent30.net/hubfs/6069238/images/trim-flashings/ms2/MS2-WS-130-1.jpg

WS-130 Bullnose Eave Trim Dimensions

CLICK TO ENLARGE

https://f.hubspotusercontent30.net/hubfs/6069238/images/trim-flashings/ms2/MS2-WS-103-1.jpg

WS-103 Trim/Panel Cleat Dimensions

For every 10' of eave trim, you will need 10' of trim cleat.

Click To Enlarge

https://f.hubspotusercontent30.net/hubfs/6069238/images/trim-flashings/ms2/Panel-Hem-MS2.jpg

Eave Hem

Click To Enlarge

WS-130 - EAVE TRIM WITH BULLNOSE DRIP EDGE - PARTS LIST

This parts list is designed to help you calculate the quantity of accessories that you’ll need for your trim installation. It has all of the accessories that are needed to install 1 full piece of trim, which is 120" long. To calculate the total number of accessories you will need for your job, simply take the number of trim pieces associated with the trim part purchased and multiply the list by that number for a total for your project.

Components List

  • 1 Piece Eave Trim - WS-130
    Roof Pitch Required
  • 1 Piece Panel Cleat - WS-103
  • 20 Pancake Head Screws (#10X1") NO Washer
    Verify Metal To Wood
  • 10 Linear Feet Of Double Sided Butyl Tape, 3/16" X 7/8"
  • 3/4 Tube Butyl Sealant
  • 1/4 Tube Silicone Sealant
  • 10 Linear Feet Of 8" Wide Sharkskin Ultra SA - Self Adhesive Roofing Underlayment

WSMR Recommends the use of a water barrier or underlayment prior to the installation of the trim components or metal roofing panels.

We recommend:

DOWNLOAD INSTALLATION GUIDE

Just in case you forgot

ADDITIONAL ITEMS YOU MAY NEED...

Image

Sharkskin Synthetic Roofing Underlayment

  • Ultra SA - Self Adhesive (Best)
    50 Year Warranty
    12 Months UV Resistance

  • Ultra - Non Adhesive (Better)
    50 Year Warranty
    12 Months UV Resistance

  • Comp (Good)
    25 Year Warranty
    6 Months UV Resistance

Learn More

Image

Clips And Fasteners

Clips and fasteners for standing seam metal roofing panels.

  • Clips
  • Rivets
  • Fasteners
  • Metal To Wood
  • Metal To Metal
  • Lap Screws

 

Learn More

Image

Snow Retention Systems

When snow accumulations begin to melt, the result can be catastrophic as the blanket of snow avalanches off the roof dumping tons of snow onto anything in its path.

It can damage landscape, gutters, adjacent roofs, vehicles and cause injury or death to passers-by. All of S-5!’s snow retention systems dramatically reduce these risks associated with rooftop avalanches while maintaining the clean lines of the roof.

Learn More