Metal Roofing, Siding, Wall Panels
Buy Manufacturer Direct And Save

7/8" Corrugated

Corrugated is an old school roofing panel that still has a modern and stylish look. The deep and wavy "S" shaped corrugations provide a bold aesthetic and shadow like effect.

PBR Panel

If you want the best overall value then PBR panels are right for you. They're strong, durable, and have a modern appearance. All of the benefits of metal roofing and siding, but without the price tag.

Western Rib® (7.2 Panel)

This is our strongest panel. It's an excellent choice if you have panels that have to span from support to support. It's capable of spanning greater distances and carrying a heavier load. It's perfect for jobs that have metal purlins.

Western Lock® Standing Seam - 1.75" Seam Height

This type of standing seam panel is the best all-around solution when you consider the performance of the panel, cost, and ease of installation.

MS2® Mechanical Seam
2" Seam Height

This is the most weather-tight style of standing seam metal roofing. It's ideal for very low sloped roofs with a pitch as low as 1":12". It's a difficult panel to install and is rarely installed by DIY roofers.

Western Seam® Nail Strip
1" or 1.5" Seam Height

Nail strip roofing panels are a snap lock system that uses screws and does not have clips. The male flange has one inch slots that are spaced 6 inches apart and fastened directly to the roof deck.

Narrow Groove® Flush Wall
1" Deep

Flush Panels for use in wall, fascia and soffit applications. Rounded interlocking leg and concealed fasteners improve appearance, weather-tightness, and strength.

T-Groove® Flush Wall
1" Deep

Flush Panels for use in wall, fascia and soffit applications. Rounded interlocking leg and concealed fasteners improve appearance, weather-tightness, and strength.

Western Reveal®
1.5" Deep

It's a versatile concealed fastener panel that's designed so that you can choose the gap between each sheet. Mix and match different reveals, face sizes, and widths.

WAV Panels®
7/8" Wave Panel

This remarkable rigid wall panel has concealed fasteners and can be installed vertically or horizontally.

• 16" Multi Wave Panel
• 12" Single Wave Panel
• 8" Single Wave Panel

Metal That Looks Like Wood

T8 PlankWall® is a metal panel system that's painted to look like an authentic wood siding. Available in three finishes that look like black charred wood, reclaimed lumber, and walnut wood.

Coil and Flat Sheets

Metal coil is available in widths of 20", 24", and 48". If you need custom widths or need the coil split to a lesser weight that can also be done. Metal flat sheets are available in a 48" width. Same day pick up or shipping is available on standard size steel coils and flats.

Synthetic Roof Underlayment

Find high strength moisture protective covering for the underlayment of your metal roof.

Trim and Flashing

Trim and flashings for metal roofing and wall panels. Corrugated, R Panel, 7.2 Panel, standing seam, flush wall panels, and more in a variety of matching colors.

Accessories

Large selection of metal purlins, trim and flashings, roofing underlayment, fiberglass panels, galvanized square tube, fasteners, foam closures, pipe flashings, sealant, and more.