HOMEOWNERS: 750 SQ. FT. MINIMUM, NO MINIMUMS FOR CONTRACTORS

Colors & Finishes
kynar-metal-roof

Choose metal roofing and metal siding panels from a variety of standard or special order colors in a Kynar® 500 paint finish. 

pbr-panels-country-red-barn

Choose metal roofing and metal siding panels from a variety of standard colors in an SMP paint finish. 

rustwall-a606-10

Choose metal roofing and metal siding panels from a variety of non-painted finishes.

black-ore-matte-standing-seam-huntington-beach

Choose metal roofing and metal siding panels that look dark aged metal.

corrugated-matte-black

Choose metal roofing and metal siding panels in Blacks, Bronzes, and Grays.

03-green-copper-standing-seam-02

Choose metal roofing and metal siding panels that look like aged patina'd copper.

galvalume-pbr-panel

Choose metal roofing and metal siding panels from a variety of panel types in a Galvalume® or Galvanized finish. 

galv-ten-robust-standing-seam

Choose metal roofing and metal siding panels that look like weathered gray zinc.

charcoal gray standing seam

Choose metal roofing and metal siding panels from a variety of matte colors in a Kynar® 500 paint finish. 

plankwall-1200x628

Choose metal roofing and metal siding panels that look like real wood. 

streaked-copper-corrugated-el-ranchito-04

There Are No Other Paint Prints That Even Come Close To The Authenticity Of The Streaked Series. It Is Designed Specifically For 7/8" Corrugated And Is A Pre-Painted Finish That Is Available In 4 Different Color Replications: Orange/Brown Rusted Roofing, Aqua Green/Brown Copper, Blue/Green Copper, Weathered Galvanized With Orange Rust Streaks

01-Fresh-Rust-Standing-Seam_b

Choose metal roofing and metal siding panels that are painted to look like real rust without the rust stains.

09-Varicool-Kaleidoscope_b

VARI-Cool Color Changing Paint System. This Exotic Paint System Is Unlike Anything You Have Ever Seen. Request A Color Chip.

Accessories
Metal Roofing Accessories

Find fasteners, anchors, bolts, hardware and more at metalforroofing.com. We are a leading provider of quality fastening products for metal roofing and siding

trim-and-flashing

Flashing and trim available in steel with coordinating finishes and colors for your residential, commercial, industrial or agricultural metal roofing project.

butyl-sealant-tape

Use sealant tape at the panel laps for metal roofs to increase weather tightness. Order yours today.

metal-roofing-fasteners-screws

Self drilling metal roofing fasteners, rivets, and clips available. All types. Metal to Wood and Metal to Metal. Painted and Galvanized.

fiberglass-roofing-panels

High Quality, Natural Illuminating FRP Panels that match our most popular metal roofing profiles. Immediate Availability - 8 OZ White.

78-corrugated-outside-foam-closure

Foam closures for metal roofing and metal decking. 7/8" Corrugated, PBR Panel, Western Rib (7.2 Panel). Shop a wide variety of foam closures and foam plugs.

galvanized-g90-square-tube

Galvanized square tube in stock in 14 gauge at many different lengths. Galvanized tube used for metal fence posts, metal carports, deck posts, panic bar gates, or building supports.

metal-purlins

Metal Purlins and Cee Channel are in stock. Cee Purlins and Zee Purlins. Galvanized and Red Prime Painted. Immediate availability.

novaflex-metal-roof-adhesive-sealant

Buy Metal Roof Sealant. Available In A Variety Of Colors And Sizes. NovaFlex Construction Silicone Colored Caulk for Metal Roofing Applications.

Western States Metal Roofing - Pipe Flashing on a Metal Roof install Blog

We offer a wide range of pipe flashings in both square and round. Shop now.

profile-vent-ridge-ventilation-closure_b

Proper metal roof ventilation is essential for a healthy indoor environment. Our ProfileVent ventilation products are an intelligent solution for your roof.

How To Install Synthetic Underlayment On A Metal Roof-15

Find high strength moisture protective covering for the underlayment of your metal roof.

snow-retention-solutions

All of S-5!’s snow guard retention systems dramatically reduce these risks associated with rooftop avalanches while maintaining the clean lines of the roof. With multiple options to choose from, you can browse our selection of metal roof snow stops to see which product will work the best for your metal roof.

Solar-Fade-1-1

S-5! provides the easiest, most cost-effective way to install solar panels directly to standing seam metal roofs.

  View All Posts

How Much Does A Metal Roof Cost? Corrugated Metal Roofing Pricing
Paul Rubio

By: Paul Rubio on February 26th, 2020

Print/Save as PDF

How Much Does A Metal Roof Cost? Corrugated Metal Roofing Pricing

Homeowner | Roofing | Corrugated Roofing

How Much Does Corrugated Metal Roofing Cost? Includes Pricing & Factors

You’re ready to remodel or build your dream house and you have decided on a corrugated metal roof. One of the first questions potential customers want to know when they call our company is, “How much does corrugated metal roofing cost?” This is a difficult question to answer as there are a lot of factors that determine the cost. We will discuss these in detail so you will be able to make the correct choice for your situation.

Purchasing a corrugated metal roof is like the purchasing of a vehicle or even a home. There are many options available and price ranges can vary drastically. Our goal in this article is to explain all of the options so that you purchase what you want the first time so as to not have any regrets down the road

You're going to see your corrugated metal roof every day for as long as you live in your home. Picking the right metal roofing panel and color the first time is critical to ensure maximum enjoyment with minimum maintenance. Because of this, most shoppers elect to get the metal roof that will make them happiest in the long-run.

Corrugated Metal Roofing: The Ultimate Homeowners Guide

Unfortunately, some customers only focus on the initial price of the corrugated metal roofing with the goal of finding the cheapest option. This may lead to sacrificing quality, warranty, and aesthetics, which inevitably leads to regret.

What Are The Factors That Affect The Cost Of A Corrugated Metal Roof?

  • Thickness or gauge of the steel
  • Finish
  • Are you purchasing from a distributor or manufacturer?
  • Size of The Job
  • Fluctuations in The Steel Market

As you can see, there are many factors that will affect the cost. When someone receives a quote from our company, we thoroughly examine each option as to educate the homeowner on the option's benefits. We want to identify its overall importance to the success of the project.

How Much Does Corrugated Metal Roofing Cost?

Depending on which type of metal panel you choose, the price for corrugated metal roofing can vary.

  • $.90 up to $1.75 per square foot for the corrugated metal panels.
  • Installation cost for corrugated metal roofing normally will range from $4.50 to $5.50 per square foot.
  • Your total price including the corrugated roofing and the installation is $5.00 up to $8.00 per square foot.

Are There Different Types Of Metal Roofs? How Much Do They Cost?

Corrugated metal roofing is not the only type of metal roof you have to choose from. If you have a larger budget then standing seam metal roofing would be a great option. It will cost about double the price of a corrugated roof, but will provide excellent value. We made a short video that discusses the price of this popular residential metal roofing panel.

 

How Does The Gauge Of The Steel Affect The Corrugated Roofing Cost?

There are lots of options when you are choosing the gauge or thickness of corrugated metal roofing. The gauge of the steel can be a bit confusing as a lower gauge is actually heavier steel. For example, 24 gauge is heavier than 26 gauge steel.

The vast majority of corrugated roofing is either 24 gauge or 26 gauge. Either gauge is appropriate for a corrugated roof. However, if you want a Kynar paint system then you must purchase a 24 gauge. If you would like a 26 gauge roof then it would only be available in a SMP paint finish. Corrugated roofing in a 24 gauge vs 26 gauge will add 25% to 35% to the price.

The lightest gauge that you can purchase is a 29 gauge corrugated roof. It is our opinion that 29 gauge is a bad investment. The 10% material savings vs the overall installed price of the roof just does not justify the lighter gauge.

If you have further interest in this subject we suggest that you read:

What Gauge Metal Roofing Should I Use For My Corrugated Roof?

Paint Systems, Colors, And Finishes Of Corrugated Metal Roofing

7/8" Corrugated in Ash Gray

⅞” Corrugated in Ash Gray

Choosing the correct paint system, color, or finish is the most important part of the project. If you have a roof that is on a commercial building or will not be seen, an inexpensive galvalume finish may be the most appropriate. On the other hand if you are building your dream house a painted product will look much nicer.

Learning about the two main paint finishes is a critical part of your research. If you’d like to learn more about how SMP and Kynar compare to each other we wrote this article:

Best Paint System For My Metal Roof Panels: SMP v. Kynar®

Download Your How To Choose A Metal Roofing Color Guide

How Much Does Galvalume Or Galvanized Corrugated Roofing Cost?

These are the cheapest corrugated roofing panels. The bright and shiny finish normally is appropriate for a commercial roof, but it looks horrible on a residential roof.

  • 26 gauge corrugated pricing EXCLUDING installation: $ .90 - $ 1.15 Per Square Foot
  • 24 gauge corrugated pricing EXCLUDING installation: $ 1.10 - $ 1.35 Per Square Foot

How Much Does Painted Corrugated Metal Roofing Cost? 

The cost of corrugated metal roofing will vary dependent upon the thickness of the steel and the paint system.

How Much Do SMP Painted Metal Roofing Panels Cost?

These are the cheapest painted corrugated roofing panels. I would consider these to be the best value. The paint finish is not as good as Kynar, but it is still a quality product.

  • 26 gauge corrugated pricing with SMP paint EXCLUDING installation: $1-$1.25 Per Sq Ft
  • 24 gauge corrugated pricing with SMP paint EXCLUDING installation: $1.30-$1.55 Per Sq Ft

How Much Does Kynar® Metal Roofing Cost?

These are the most common painted corrugated roofing panels. Kynar panels have the best warranty and they will have better chalk and fade when compared to SMP. This type of metal roofing is rarely available in a light gauge steel.

  • 24 gauge corrugated pricing with Kynar paint EXCLUDING installation: $1.50-$2 Per Sq Ft
  • 22 gauge corrugated pricing with Kynar paint EXCLUDING installation: $2-$3 Per Sq Ft

Corrugated Metal Roofing Cost In Specialty Paint Finishes

7/8" Corrugated in Streaked Rust®

⅞” Corrugated in Streaked Rust®

A paint print will try to replicate a naturally occurring patina. It is a painted panel that looks old and weathered. Specialty paint prints normally consist of painted panels that try and replicate the following appearances: orange/brown rust, weathered gray, patina’d copper, blackened steel.

  • 24 gauge corrugated with a specialty paint EXCLUDING installation: $2.50-$3 Per Sq Ft

Where Can I Buy Corrugated Metal Roofing?

Where you purchase your metal roofing from is the single greatest way to save a substantial amount of money. In this section we will discuss the most common purchasing channels

  1. Metal Roofing Manufacturers That Sell Direct To Public
  2. Distributors
  3. Roofing Contractor

Most metal roofing manufacturers will not sell directly to homeowners and in some cases even metal roofing contractors. If you can find a metal roofing manufacturer that deals directly with the public it will be your greatest opportunity to save money on your metal roof. Buying directly from the manufacturer will save you 15% to 50%.

When you purchase directly from the manufacturer you will need to know what you need. The manufacturer will NOT create your materials list. You will need to know how many panels at what length plus all of the trim.

Western States Metal Roofing is a metal roofing manufacturer that sells direct to homeowners, roofing contractors, and general contractors.

It is common to purchase material through roofing supply companies or other distributors. They will put a mark up on the panels that is normally in the range of 15% to 50% depending upon the size of the job.

If you already know what you need, this might not be the best option for you. However, if you need guidance through the process of figuring out your materials list and the appropriate trims then this is money well spent.

When you get a bid for a metal roof the contractor will normally give you a price on materials plus labor. However, the contractor typically will put a mark up on the panels that is normally in the range of 10% to 20%.

If your contractor was getting a good price to start with, then a 20% mark up would be reasonable. This covers the time to create a materials list and liability if something goes wrong. When sourcing material from roofing contractors, there are two things to consider:

  • Limited selection of colors and finishes
  • Did they get the best price prior to marking it up?

If you find your own source to purchase the metal roofing, you’ll have more flexibility. You can now choose from a much larger selection of colors and finishes. In addition, the process of comparing bids is easier because it’s universal. Everyone is supplying the same thing in the bid: labor only. It is an apples to apples comparison.

If you decide to do this there a couple of important things to keep in mind

  • Verify that the roofing contractor will supply a materials list to the metal roofing manufacturer.
  • Find out whether underlayment is included within the bid. This is a major part of the bid and it is important that you choose the right underlayment. Underlayments can be purchased from either the supplier or contractor. In either instance we suggest that you specify the type of underlayment that you would like installed on your roof.

Size of the metal roofing job

Smaller jobs will always cost more money than larger projects. In most instances the cost difference is relatively minor. However, if you have a really small or really large project you will see significant price differences. We’ve broken this into three groups and will give you some guidance on each.

  1. Really small job under 1,000 square feet
  2. Typical job 1,001 to 5,000 square feet
  3. Larger than 5,000 square feet

A job of this size will normally cost 20% to 100% more than a larger project of greater than one thousand square feet and less than five thousand square feet.

If the job is closer to one thousand square feet the difference is minimal. If the job is under 500 square feet it would not be uncommon for the price to be twice as expensive.

There will be a range depending on the size of the job, but it is minimal. Typically the jobs that are closer to five thousand square feet are 10% to 15% less than the smaller ones.

There will be a small cost savings of maybe 5% when the job gets closer to ten thousand square feet. If the project is even larger, there is an opportunity for more savings.

Price Fluctuations In The Steel Market

The price of steel is never the same. When we purchase steel, the cost is always different. Normally the difference is minimal. There are circumstances such as steel tariffs that can greatly increase the pricing. Quotes are valid for 15-30 days. If your project is a long way out then the price that you were quoted may not be the price that you get when you are ready to purchase.

Other Considerations

It can be surprising to realize that there are a wide variety of products that fall under the category of corrugated metal roofing. This is why the pricing for corrugated sheet metal is not “one size fits all”. Before moving forward with receiving a quote, make sure you have an idea of which product you are looking for.

To help narrow down the choices, consider the following questions:

Save Money On Your Corrugated Metal Roofing. Buy Directly From The Manufacturer

There are many factors that we have discussed that go into the cost of corrugated metal roofing. The numbers in this article should provide you with an estimate for the price of your new roof or wall. You’ll find that you cannot get an exact price as each job is different.

The only way to know exactly what your project will cost is to speak with metal roofing manufacturers and contractors and get a quote. If you don’t need guidance selecting the right materials for your roof, buying directly from manufacturers is the most affordable route. We’d love to speak with you and provide you with a free quote.

At Western States Metal Roofing, we have route trucks that service the entire USA, Canada, and Mexico. Our freight department is dedicated to sending your order on the fastest and least expensive route possible.

 

Get a free quote for metal roofing and metal wall panels by clicking here.

 

 

 

 

 

About Paul Rubio

Paul Rubio is the Vice President and one of the owners of Western States Metal Roofing. He has been in the metal roofing industry for 25 years. WSMR is a manufacturer of metal roofing, wall panels, and metal siding. We have colors and finishes that nobody else has with nearly 100 different colors in stock. Our selection of color options and finishes is likely the largest in the industry.