Metal Roofing Learning Center | Western States Metal Roofing Blog

Metal Siding & Wall Panels: Top Customer Questions Answered

Written by Lauren Risotto | Nov 15, 2021 8:00:00 AM

Metal siding and wall panels still have a lot of misconceptions, despite its popularity. These myths about metal siding sometimes prevent customers from moving forward on using a metal siding material.

At Western States Metal Roofing, we are asked about these concerns often and can help you answer all your questions to keep you correctly informed when making a big purchasing decision like choosing your siding material. 

In this article, we answer the top questions and concerns customers have when it comes to metal siding:

Are Metal Siding And Wall Panels Difficult To Maintain?

Metal is a low maintenance material. However, the level of maintenance depends on which type of metal panel you choose. There are two main categories of metal panels, exposed fastener and concealed fastener systems

For exposed fastener systems, the metal panels would be more difficult to maintain because there are more ridges that are open. Most importantly, they are fastened with screws that have sealing washers. It’s possible that the screws can be tightened incorrectly or that the washers will fail after many years. This can allow for for water to get through and leak into the walls. However, these types of panels are typically easier to install.

Exposed fastener systems include any corrugated panel as ⅞” Corrugated, PBR/R-Panel, and Western Rib (7.2 Panel).

 

⅞” Corrugated in Weathered Metallic

With concealed fastener systems, metal panels are much easier to maintain and require less effort to clean. Especially if your metal panel is installed vertically, the concealed fastener panels provide greater weathertightness to your building. On the other hand, these types of panels are more difficult to install and require special tools.

The panels for concealed fastener systems include Standing Seam, Western Wave, or a flush wall panel such as T-Groove, Western Reveal, and T-Reveal

 

Western Wave in Dark Bronze

For more information, including a summarized chart that compares concealed and exposed systems, we recommend reading:

Which Metal Wall Panel Is Right For You?: Types, Cost, and Maintenance.

Can Metal Siding And Wall Panels Be Insulated? 

The misconception that metal roofs and siding cannot be insulated has endured the test of time. People continue to be afraid of  using metal siding in cold climates because they feel their metal will not shield them from the elements. 

There's no need to be concerned about the cold because both metal siding and roofing may be insulated. Insulated metal panels are actually more energy efficient than many of the other material options available. In the summer, metal reflects the heat of the sun, while in the winter, it traps your heat.

 

Are Metal Siding And Wall Panels Noisy?

One of the most common misunderstandings about metal roofing and siding is that it would make the house very noisy if it rains or hails. 

Sure, you'll hear some noise if you whack or bang on a metal panel. To ensure that you won’t be disturbed by any noise coming from your metal panel, make sure your building is properly insulated. Metal, when fitted with strong sheathing, will actually be more sound-proof than asphalt.

 

Do Metal Siding And Wall Panels Dent Easily?

Many people have the misconception that metal can be dented easily. However, metal siding can withstand virtually any weather condition, including hail storms, heavy rain or snowfall, fire, and gale-force winds without experiencing damage. Metal panels have a Class 4 impact resistance rating, the highest rating a panel can receive for durability. For additional durability, you can choose metal siding in a heavier gauge.

 

Are Metal Siding And Wall Panels Expensive? 

Metal siding has a higher upfront cost, but experienced homeowners understand that the initial investment pays off in the long term. 

Metal roofing may last anywhere between 40 and 70 years, which is more than twice as long as an asphalt roof. Metal roofs are durable, won’t crack or corrode, and are sure to withstand the elements.

 

Metal Siding Panels Cost For 2022 - Materials Only

The chart below gives a general price range for the different types of metal siding and wall panels.

Metal Siding Panel Type

Metal Siding Panel Price Per Sq. Ft.

Exposed Fastener Panel- 26 Gauge SMP Paint Finish

$1.75 to $2.50 per sq. ft.

Exposed Fastener Panel- 24 Gauge PVDF Paint Finish

$2.50 to $3.50 per sq. ft.

Concealed Fastener Panel- 24 Gauge PVDF In Standard Colors

$3.00 to $4.00 per sq. ft.

Concealed Fastener Panel- 24 Gauge PVDF Specialty Paint Prints

$4.00 to $4.75 per sq. ft.

 

Is Metal Siding Right For Your Project?

When deciding if metal siding is right for you, consider the following things we’ve discussed: 

  • Metal siding is a low maintenance material. Exposed fastener panels require slightly more maintenance than concealed fastener panels due to their open ridges.
  • Metal siding can be insulated.
  • Metal siding panels can block out just as much noise as other materials. 
  • Metal siding is a durable material that can withstand denting and scratching from debris and harsh weather conditions.
  • While metal siding has a higher upfront cost than some other siding materials, it also lasts longer which brings you long term savings by not having to replace your steel siding as quickly.

Now that you’ve learned about the common misconceptions of metal siding and wall panels, you’re probably wondering what are some of the challenges and benefits of a metal siding installation. Perhaps metal siding is something you’re not yet familiar with, or it’s a material you’ve just started looking into as a siding possibility. 

We want to educate on what you need to know about metal to help you decide if it’s the right siding choice for your home.

To learn more about the advantages and disadvantages of metal siding, we recommend reading:

The Pros and Cons Of Metal Siding - A Guide For 2021