Metal Coil/Flats: Same Day Pick Up In Arizona

Products
MS2® MECHANICALLY SEAMED ROOFING

Floating Endwall - Part #WS-124

Floating endwall means that the standing seam panels aren't pinned in place at the endwall. This allows for expansion and contraction. If you have a floating endwall, you will need a fixed connection at the other end of the standing seam panel. 

Most of the jobs that we supply have a fixed endwall. This detail is not used that often.

WS-114 Zee Closure Dimensions

For every 10' of endwall, you will need 10' of zee closures.

Click To Enlarge

WS-113 Reglet Dimensions

For every 10' of endwall, you will need 10' of reglet trim.

Click To Enlarge

WS-112 Panel End Support Dimensions

For every 10' of endwall, you will need 10' of panel end support.

Click To Enlarge

WS-124 - FLOATING ENDWALL - PARTS LIST

This parts list is designed to help you calculate the quantity of accessories that you’ll need for your trim installation. It has all of the accessories that are needed to install 1 full piece of trim, which is 120" long. To calculate the total number of accessories you will need for your job, simply take the number of trim pieces associated with the trim part purchased and multiply the list by that number for a total for your project.

Components List

  • 1 Piece Endwall Flashing - WS-124
    Roof Pitch Required
  • 1 Piece Zee Closure - WS-114
  • 1 Piece Reglet Trim (Optional) - WS-113
  • 1 Piece Panel End Support - WS-112
  • 38 Rivets
  • 20 Linear Feet Of Double Sided Butyl Tape, 3/16" X 7/8"
  • 2 1/4 Tubes Of Butyl Sealant
  • 1/4 Tube Silicone Sealant

WSMR Recommends the use of a water barrier or underlayment prior to the installation of the trim components or metal roofing panels.

We recommend:

 

Just in case you forgot

ADDITIONAL ITEMS YOU MAY NEED...