1/2" Corrugated Trim and Flashing
We can make any custom trim or flashing.
Gutter and downspout.
Painted, Galvalume, Galvanized, Bonderized, A606 (aka Corten).
Lengths up to 21'.
Immediate availability.
Designed to guide run-off into gutters. Oversize valley, extended valley, and standard valley flashings available for 1/2" corrugated.
Eave flashings provide an excellent way of finishing off the low side of the roof panels. The kick out design directs water away from the wall panel below.
Mini gable flashings are designed to finish off the edge of the roof (gable or rake). The gable trim combined with sealant provides a watertight seal for your roof system.
Oversize valley, extended valley, and standard valley flashings available for 1/2" corrugated.
Downspouts are usually vertical and usually extend down to ground level. The water is directed away from the building's foundation, to protect the foundations from water damage.
Use this Flashing when coming through the peak of the roof. No matter what the peak is, this flashing will work for you.
A window and door has cladding junctions at the head, jamb and bottom of all joinery.
Roof edge, sometimes called drip edge, is metal flashing used for a neat finish where the roofing material comes to the edge of the roof.
Inside corner flashings are perfect for recessed windows or other transitional flashing applications.
Eliminates mold protrusions and irregularities of other designs. Outside corners provide a leak proof, weather resistant, uniform, permanent corner seal.
Sidewall flashing is to be used where flashing is needed to go behind the wall steel and on top of the roof steel.
Ridge caps are designed to cover the top of a roof along its ridge line. Provides a clean, neat finish to ridge and hips.
Transition trim for roof slopes that change from a high pitch to a low pitch.
Transition trim for roof slopes that change from a low pitch to a high pitch.